Top Janatics Accessories,Festo Accessories,Festo Solenoid Valve Products in Vadodara at best prices | ADVANCE INDUSTRIES -FESTO-JANATICS-KITZ-BELIMO-SMC

Janatics AND Valve (Sizes: M5, G1/8, G1/4)

AND valve delivers air at the outlet (A) only when air signal is present at both inputs (X and Y) - If two signals of different pressure is applied, the lower pressure is connected to outlet (A). -Type: Directional Control Valves (mainly 3/2, 5/2, 5/3) Actuation: Manual, Mechanical, Pneumatic, or Solenoid operated Mounting: Sub-base / Manifold / Individual Sizes: Port sizes available (typically M5, 1/8', 1/4', etc.) Construction: Aluminium / Anodized body for durability Sealing: Nitrile (NBR) seals for long life Operating Pressure Range: ~1.5 to 10 bar Medium: Compressed air, filtered & lubricated / unlubricated Temperature Range: 5°C to 60°C (approx.) The GA Series from Janatics are pneumatic valves widely used in industrial automation for controlling compressed air flow. Used in automation panels, machinery, pick & place systems, packaging, and material handling. Ideal for directional air control in cylinders, actuators, and other pneumatic systems.

Janatics Accessories

Inline Slide Valve (Sizes : R1/8, R1/4, R3/8, R1/2, R3/4)

Inline mounted - Sleeve type, saves space - Smooth, easy operation -Note the direction of flow before installation and connect piping accordingly. Flush pipings for dirt, dust, rust and other foreign particles. Install in clean atmosphere. Use teflon tape on taper threads. Ensure teflon tape does not enter the unit during tightening. Application • These valves can be used at the inlet of pneumatic tools like screwdriver, grinder etc., pneumatic systems and near machineries using pneumatic systems, for quick and convenient connecting - disconnecting of compressed air. Operation • Moving the sleeve towards ' OUT ', connects the air line to the system and moving the sleeve in the opposite direction, will close the inlet port and exhaust the down stream air.

Janatics Accessories

OR Valve (Sizes: M5, G1/8, G1/4 )

OR valve delivers air at the outlet (A) always supplied by higher pressure (X or Y) - If two signals of different pressure is applied, the higher pressure is connected to outlet (A) -An OR valve (or shuttle valve) is used to allow a function to be executed from either of 2 different places. An output signal is present whenever at least one of 2 signal inputs is activated. It can be used in safety circuits and logic controls. - While ordering OR Valve, mention the ordering number given in the corresponding tables.

Janatics Accessories

Air Tank While ordering Air Tank, mention the ordering number given in the corresponding tables. - Angular Line Strainer Can be assembled with F15, FRC15, FS15 & L15 series of products Can be assembled directly in airline Bronze filtering element Serviceable - Clamps for FRL CLAMPS FOR REGULATOR AND FRL UNIT - Flow Meter 2 line LCD display for monitoring flow rate and total value Fast response Analog output for monitoring flow rate - Precision Regulator 1/8 & 1/4 Precise pressure control Characteristics such as flow characteristic, pressure characteristic and repeatability are superior compared with standard regulators Excellent relief flow characteristic is available Suitable for Panel & Modular mountings Diaphragm operated, relieving type (Exhaust) Clamp and pressure gauge can be mounted either in the front or the back Can be assembled with F13, FRC13, FS13 & L13 series of products - Precision Regulator G1/2 Some of the applications of precision regulator, 1. Manufacturers of air gauging equipment, 2. Medical equipments, 3. Leak testing equipment, 4. Polishing machinery, 5. Web tensioning, 6. Measuring machines, 7. Ink or paint, Robotics spraying systems, 8. Tank blanketing and many… - Pressure Indicator Compact size Quick response Panel mountable Noiseless performance - Pressure switch New Suitable for DIN 43650 connector Variants available with Integrated LED for switching status indication Robust design Variants available with Nitrile and Viton series - For Modular construction - Shut Off Valve Connecting thread at both ends Connection - G1/4, G3/8, G1/2 Modular mounting with FRL -Shut Off Valve Lockable GS2 Series (Sizes : G1/4, G3/8, G1/2) Modular mounting with FRL Port thread at both ends Window display to show the valve position • ( i.e.) the valve is in On condition or Off condition - Pressure Gauge - Auto Drain Valve NA1 series - Sizes : G1/4, G3/8, G1/2 Individual unit(Externally mountable) Low operating pressure Compact size Elegant design and finish Long life - Pressure Switch Quick response Easy adjustability of set pressure Hysteresis adjustable - Pressure Sensor - 1 output Digital Pressure Sensor (Series PS - R1/8) 2 Colours display (Red / Green) Set pressure selectable (kPa, psi, kgf/cm2, bar) Both upper and lower limits of pressure can be set independently Panel mountable Direct mountable Both PNP & NPN versions Single output - Pressure Sensor - 2 outputs

Janatics Accessories

Janatics One Touch Fittings (Mini) - Ø4 & Ø6 mm

Miniature - Save space - Attractive design - Compact size - Full area of the inner bore of the tubing is available for flow of fluid - Bubble tight sealing of tubes - Suitable for both Nylon and PU tubing - Easy and quick push-in connection of tube / easy removal of tube by simple pressing of collet cap - 'New design' - Stainless steel collet - Teflon pre-coated male taper threads - Maintenance free and long life - The fitment and function of tubes are not affected by vibrations due to positive gripping of the tube by the collet One-touch fittings can be effectively used in all compressed air applications Some of the pneumatic applications include Pneumatic cylinders (all types) Directional control valves, solenoid valves and other valves Air preparation units like filter, regulator and lubricators Pneumatic control panels All compressed air lines, machinery of all kinds wherever pneumatic systems are used Pneumatic circuits in any industry

Janatics Accessories

Janatics One Touch Fittings (Stainless Steel) - Ø4 & Ø16 mm

Attractive design - Compact size - Threaded nipples of male elbow fittings enable to by 360 degree - Full area of the inner bore of the tubing is available for flow of fluid - Stainless steel design ensures superior clamping by bubble tight sealing of various tubes - Suitable for different materials of tubing (Nylon (Polyamide), Soft Nylon, Polyurethane, Polyethylene) - Easy and quick push-in connection of tube / easy removal of tube by simple pressing of collet cap - Maintenance free and long life - Short parallel threaded connection - Male thread seal - BSP - PTFE seal - No loosing of tube due to vibration - positive gripping by collet - While ordering fittings, mention the ordering number given in the corresponding tables, and tubes mention the ordering number with required length in metres

Janatics Accessories

Janatics Straight Fittings - M5, 1/8, 1/4, 3/8, 1/2, 3/4, 1”

Attractive design - Compact size - Threaded nipples of L, T & Y fittings enable plastic portion to turn by 360° - Full area of the inner bore of the tubing is available for flow of fluid - Bubble tight sealing of tubes - Suitable for both Nylon and PU tubing - Easy and quick push-in connection of tube / easy removal of tube by simple pressing of collet cap - 'New design' - Stainless steel collet - Teflon pre-coated male taper threads - Maintenance free and long life - The fitment and function of tubes are not affected by vibrations due to positive gripping of the tube by the collet - One-touch fittings can be effectively used in all compressed air applications. Some of the pneumatic applications include Pneumatic cylinders (all types) Directional control valves, solenoid valves and other valves Air preparation units like filter, regulator and lubricators Pneumatic control panels All compressed air lines, machinery of all kinds wherever pneumatic systems are used Pneumatic circuits in any industry While ordering Straight Fittings, mention the ordering number given in the corresponding table, and for tubes, mention the ordering number with required length in metres.

Janatics Accessories

Janatics Elbow Fittings - M5, 1/8, 1/4, 3/8, 1/2, 3/4, 1”

Attractive design - Compact size - Threaded nipples of L, T & Y fittings enable plastic portion to turn by 360° - Full area of the inner bore of the tubing is available for flow of fluid - Bubble tight sealing of tubes - Suitable for both Nylon and PU tubing - Easy and quick push-in connection of tube / easy removal of tube by simple pressing of collet cap - 'New design' - Stainless steel collet - Teflon pre-coated male taper threads - Maintenance free and long life - The fitment and function of tubes are not affected by vibrations due to positive gripping of the tube by the collet -One-touch fittings can be effectively used in all compressed air applications. Some of the pneumatic applications include Pneumatic cylinders (all types) Directional control valves, solenoid valves and other valves Air preparation units like filter, regulator and lubricators Pneumatic control panels All compressed air lines, machinery of all kinds wherever pneumatic systems are used Pneumatic circuits in any industry -While ordering Elbow Fittings, mention the ordering number given in the corresponding table, and for tubes, mention the ordering number with required length in metres.

Janatics Accessories

Janatics Tee Type Fittings - M5, 1/8, 1/4, 3/8, 1/2, 3/4, 1”

Attractive design - Compact size - Threaded nipples of L, T & Y fittings enable plastic portion to turn by 360° - Full area of the inner bore of the tubing is available for flow of fluid - Bubble tight sealing of tubes - Suitable for both Nylon and PU tubing - Easy and quick push-in connection of tube / easy removal of tube by simple pressing of collet cap - 'New design' - Stainless steel collet - Teflon pre-coated male taper threads - Maintenance free and long life - The fitment and function of tubes are not affected by vibrations due to positive gripping of the tube by the collet One-touch fittings can be effectively used in all compressed air applications. Some of the pneumatic applications include Pneumatic cylinders (all types) Directional control valves, solenoid valves and other valves Air preparation units like filter, regulator and lubricators Pneumatic control panels All compressed air lines, machinery of all kinds wherever pneumatic systems are used Pneumatic circuits in any industry While ordering Type Tee Fittings, mention the ordering number given in the corresponding table, and for tubes, mention the ordering number with required length in metres.

Janatics Accessories

Janatics Y Type Fittings- M5, 1/8, 1/4, 3/8, 1/2, 3/4, 1”

Attractive design - Compact size - Threaded nipples of L, T & Y fittings enable plastic portion to turn by 360° - Full area of the inner bore of the tubing is available for flow of fluid - Bubble tight sealing of tubes - Suitable for both Nylon and PU tubing - Easy and quick push-in connection of tube / easy removal of tube by simple pressing of collet cap - 'New design' - Stainless steel collet - Teflon pre-coated male taper threads - Maintenance free and long life - The fitment and function of tubes are not affected by vibrations due to positive gripping of the tube by the collet - One-touch fittings can be effectively used in all compressed air applications. Some of the pneumatic applications include Pneumatic cylinders (all types) Directional control valves, solenoid valves and other valves Air preparation units like filter, regulator and lubricators Pneumatic control panels All compressed air lines, machinery of all kinds wherever pneumatic systems are used Pneumatic circuits in any industry - While ordering Type - Y Fittings, mention the ordering number given in the corresponding table, and for tubes, mention the ordering number with required length in metres

Janatics Accessories

Janatics Swivel Fittings- M5, 1/8, 1/4, 3/8, 1/2, 3/4, 1”

Attractive design - Compact size - Threaded nipples of L, T & Y fittings enable plastic portion to turn by 360° - Full area of the inner bore of the tubing is available for flow of fluid - Bubble tight sealing of tubes - Suitable for both Nylon and PU tubing - Easy and quick push-in connection of tube / easy removal of tube by simple pressing of collet cap - 'New design' - Stainless steel collet - Teflon pre-coated male taper threads - Maintenance free and long life - The fitment and function of tubes are not affected by vibrations due to positive gripping of the tube by the collet - One-touch fittings can be effectively used in all compressed air applications. Some of the pneumatic applications include Pneumatic cylinders (all types) Directional control valves, solenoid valves and other valves Air preparation units like filter, regulator and lubricators Pneumatic control panels All compressed air lines, machinery of all kinds wherever pneumatic systems are used Pneumatic circuits in any industry - While ordering Swivel Fittings, mention the ordering number given in the corresponding table, and for tubes, mention the ordering number with required length in metres.

Janatics Accessories

Janatics Multi Distributor Fittings- M5, 1/8, 1/4, 3/8, 1/2, 3/4, 1”

Attractive design - Compact size - Threaded nipples of L, T & Y fittings enable plastic portion to turn by 360° - Full area of the inner bore of the tubing is available for flow of fluid - Bubble tight sealing of tubes - Suitable for both Nylon and PU tubing - Easy and quick push-in connection of tube / easy removal of tube by simple pressing of collet cap - 'New design' - Stainless steel collet - Teflon pre-coated male taper threads - Maintenance free and long life - The fitment and function of tubes are not affected by vibrations due to positive gripping of the tube by the collet One-touch fittings can be effectively used in all compressed air applications. Some of the pneumatic applications include Pneumatic cylinders (all types) Directional control valves, solenoid valves and other valves Air preparation units like filter, regulator and lubricators Pneumatic control panels All compressed air lines, machinery of all kinds wherever pneumatic systems are used Pneumatic circuits in any industry